Before you acquire to wiring and also mounting a light switch in a newly included or recently converted room without a wall outlet, learn exactly how high to install the irradiate switch because that easy access and mounting.
You are watching: What is the standard height of a light switch
Adjust the elevation of switches an installed over countertops.
When mounting a irradiate switch over a countertop—for example, in an indoor oroutdoor kitchen, an art studio, or a handmade room—reduce thestandard wall surface mounting elevation to 40 inches. This reduced light switch height will enable you to avoid interfering with higher-up obstructions top top the wall like backsplashes or cabinetry, while still hovering four inches above the top of a traditional 36-inch-tall counter.
Make accommodations for youngsters or adults of smaller sized stature.
The 48-inch standardworks well for anyone aged 12 and also above. For light switch installations in rooms used primarily by youngsters (like a brand-new playroom), the ADA recommends different ranges for minimum outlet and also light move heights:20 come 30 inches over the floor for kids aged 3 to 418 to40 inches above the floor for ages 5 to816 to 44 inchesabove the floor for periods 9 with 12
Likewise, if someadults in your family members are that a more petite stature that prevents them from quickly accessing alight move positioned 48 inches off the ground, consider reducing the height to something lower within the ADA-acceptable variety that they can much more comfortably reach.
When cut drywall, remember the your wanted light switch elevation will be where you place the centerline that the switch and also plate.
The ADA irradiate switch height ranges refer to the recommended distance from the floor to the operable component of a irradiate switch, quite than the optimal or bottom that the cover—usually the centerline for traditional light switches. When installing, you’ll measure up 48inches above the ground native any point on the floor and mark the spot on the wall. Then, prior to you cut out awall outlet opened in present drywall, place an old-work box (also recognized as a remodeling box)backwards on the drywall so the the centerline of package aligns with themark friend made ~ above the wall. Map the perimeter that the old-work box, then eliminate your template. From here, enlist a drywall witnessed to cut out the outlined area in the drywall.
Wire and also mount the light switch.
See more: How To Make A Flagpole Pulley System, Build Your Own Flagpole : 4 Steps
Once you’re sure that strength is shut turn off to the wire that will be fed into the old-work box, insert the old-work box into the drywall opening with the strength wire runningthrough the drywall opening and fed through the old-work box through at the very least six to seven inches ofthe wire exposed (you have the right to use a cable stripper to piece the wire). Certain the old-work box to thedrywall v screws, wire and also mount your new light switch right into the old job-related box, and thensecure it to the wall with screws. Gain back power come the strength wire and also switch the irradiate on and also offto test your handiwork.