CKS1507 Alarm Clock Radio with Bluetooth,USB Visit our web site at www.emersonradio.com


1. WARNING

TO PREVENT FIRE OR SHOCK HAZARD , DO NOT USE THIS PLUG WITH AN EXTENSION CORD,RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED AND THERE IS NO BLADE EXPOSURE . TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

You are watching: How to turn off alarm on emerson smartset clock radio


*

WARNING: SHOCK HAZARD – DO NOT OPENCaution Marking and rating plate was located at rear enclosure of the apparatus. Attention should be drawn to the environmental aspects of battery disposal;Minimum distances 10cm around the apparatus for sufficient ventilation; The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers , table-cloths, curtains, etc.No naked flame sources , such as lighted candles, should be placed on the apparatus;The use of apparatus in moderate climates.tTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture .

9. WARNING Do not ingest the battery, Chemical Burn Hazard This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death . Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

10. When a plug on the unit is used as a disconnect device. this unit must remain readily accessible.

10. The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

ATTENTION Danger of explosion if the battery is not replaced correctly. Replace only with the same type or equivalent type The appliance must not be exposed to water dripping or splashing and that no objects filled with liquids such as vases should be placed on the appliance.

IC Warning: This device complies with Industry Canada License-exempt RSS standard(s).Operation is subject to the following two conditions:(1)this device may not cause interference. and (2)this device must accept any interference, including interference that may cause undesired operation of the device.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102- Radio Frequency (RF) Exposure guidelines, this equipment should be install led and operated with a minimum distance of 20cm between the radiator and your body.

FCC Note: FCC Part 15.19 Warning Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1 )THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED. INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FCC Part 15.21 Warning Statement NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT.

FCC Part 15.105 Warning StatementNote: This equipment has been tested and found to comply with the limits for a class B digital device ,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation .This equirement generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio communications. However there is no guarantee that interference to radio communication .If this equirement does cause harmful interference to radio or television reception, which can be determined by turning the equirement off and on ,the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna .Increase the separation between the requirement and receiver.connect the requirement into an outlet on a circuit different from that to which the receiver is connected.consult the dealer or an experienced radio/TV technician for help.

RF warning statement The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC”s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

2. Important Safety Instructions

Read these instructions. Keep these instructions . Follow all instructions. Heed all warnings. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heaters, stoves , or other apparatus(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong . The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, ask an electrician to replace the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus.Only use attachments/ accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus. the apparatus has been exposed to rain or moisture. does not operate normally, or has been dropped.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injure from tip-over.The AC adapter must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on apparatus. The AC adapter is used as a disconnect device and it must remain readily accessible during intended use. In order to disconnect the apparatus from the AC power completely, the AC adapter must be removed from the AC outlet completely. The battery must not be exposed to excessive heat such as sunshine, fire, etc.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

3. Preparation For Use

Unpacking And Set Up

Remove the radio from the carton and remove all packing material from the radio. Save the packing material .if possible, in case the radio ever needs to be serviced or transported. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit.Remove any descriptive labels or stickers on the front or top of the cabinet . Do not remove any labels or stickers from the back or bottom of the cabinet. Note the serial number on the bottom of your radio and write this number in the space provided on the Warranty page of this manual.Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.Unwind the Line cord connecting the AC adapter and extend it to its full length . The FM antenna is built in to this cord. It must be fully extended to provide the best FM reception.

Protect Your Furniture This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes , wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften. and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.

Power Source This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source . You could cause damage to the radio that is not covered by your warranty. This radio should be connected to an AC outlet that is always ‘live’. Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the radio connected to a ‘live’ AC outlet at all times.

See more: Dragon Ball Z Budokai Tenkaichi 3 Ps2 Cheat S For Playstation 2

4. Important Notes

Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as: electric heaters, on top of other stereo equipment that radiates heat, places lacking ventilation, dusty areas, places subject to constant vibration and/or humid or moist areas.Operate controls and switches as described in the manual. Before turning on the power, make certain that the AC adapter is properly installed. When moving the set, be sure to first disconnect the AC adapter.

5. Package Contents