Instructions & Warranty

Thankyou because that your acquisition of this top quality clock. The utmost care has gone into the design and also manufacture of your clock. Please check out these instructions and also store them in a safe place for future reference.

You are watching: How to set an alarm on a sharp clock

FEATURES: big 1.4" LED Display twin Alarm High or Low display Brightness 9 Minute Snooze 9V Battery earlier up (Batery not Included)
*
POWER it is provided start by plugging in the strength cord into a standard family outlet. The display will flash indicating it requirements to be set. SETTING the moment Press and hold the TIME button down come activate time setting. White holding down the time button, press the HOUR switch to breakthrough to the exactly hour. The pm indicator will light once the hour is progressed into the pm time. When holding down the time button, press the MINUTE button to development to the correct minute. Release the TIME switch when the exactly time is presented on the display. Setup THE alarm 1/2 on slide the alarm 1/2/DUAL slide switch to alarm 1/2 position, then press and also hold the ALARM button to activate alert 1/2 setting. The alarm 1/2 Indicator will certainly light when the alarm 1/2 setup is activated. When the alarm 1/2/DUAL slide move is top top the alarm 1/2 position and also holding down the alert button, press the HOUR button to advance to the correct hour. The pm Indicator will certainly light as soon as the hour is progressed into the afternoon time. While the alarm 1/2/DUAL slide move is ~ above the alarm 1/2 position and holding down the alarm button, press, the MINUTE switch to development to the correct minute. Release the ALARM switch when the exactly alarm 1/2 time is presented on the display. Utilizing THE alarm slide the alert ON/OFF switch to the on position, climate slide the alert 1/2/DUAL slide move to pick using alert 1, alert 2, or dual alarm. The alert 1 indicator dot and ALARM2 Indicator dot will certainly be lit follow to your choice. The alarm will certainly sound in ~ the preset time. On slide the alert ON/OFF switch to the OFF position to deactivate the alarm. The alert Indicator dot will certainly no much longer be visible. Making use of THE SNOOZE pressing the SNOOZE/DIMMER button when the wake-up alert is sounding will reason the alarm to stop and the alarm will sound again in nine minutes. This will take place each time when the SNOOZE/DIMMER button is pressed.

PG 1



USING THE DIMMER when the alarm is no sounding, push the SNOOZE/DIMMER button to change the HIGH or short seting to control the brightness that the clock display. Note: The default is HIGH setting. BATTERY back UP rotate the clock over and insert a 9V battery as suggested to administer battery ago up. The battery will host the ALARM and also TIME settings until power is restored. There will certainly be no screen under battery power and also the ALARM will certainly sound in ~ the correct time. If there is no battery and also the power is interrupted, the display will flash 12:00 and also the ALARM and the TIME will need to be reset. Care OF your CLOCK change the ago up battery annually, or keep the clock there is no a battery as soon as not in use. A soft cloth or a record towel may be provided to clean her clock. Do not use any kind of corrosive cleaner or chemical remedies on the clock. Save the clock clean and also dry come avoid any kind of problems.

For Customer business Please contact Toll cost-free at1-(800)-224-0131 and also ask because that Customer company at x7546.Monday-Friday 9:00 am - 4:00 pm ESTPlease call for assistance prior to returning the clock come the store.

One Year limited Warranty

M.Z. Berger & company warrants the original consumer purchaser that this product that it candlestick be complimentary of defects in materials and workmanship because that one year indigenous the purchase day of this product. Defects brought about by tampering, improper use, unauthorized modifications or repairs, immersion in water or abuse space not spanned by this warranty. If a defect extended by this vouch occurs throughout the guarantee period, wrap her clock carefully and send it come the following address:

MZ Berger company Center29-76 northern BoulevardLong Island City, NY 11101

You must encompass a proof of Purchase, either the initial receipt or a photocopy and also a inspect or money order for USD $3.00 come cover the cost of handling. Additionally include your return attend to inside the package. M.Z. Berger will repair or replace the clock and also return it to you. M.Z. Berger will certainly not be responsible for any loss or damage, including incidental or consequential loss of any kind; from any kind of breach that warranty either expressed or implied relatihg come the product. Due to the fact that some states perform not allow the exemption or limitation the incidental or consequential damages, this limitation may not apply to you.

Printed in China
Model SPC597

SHARP, registered in the U.S. Patent and Trademark Office.

PG 2



IMPORTANT safety and security INSTRUCTIONS

Read this instructions--All the safety and also operating instructions must be read before this product is operated.Keep these instructions--The safety and operating instructions should be kept for future reference.Heed all warnings--All warnings top top the appliance and in the operating instructions have to be adhered to.Follow every instructions--All operating and use instructions need to be followed.Do not usage this apparatus close to water--The appliance should not be used close to water or moisture--for example, in a wet basement or near a swimming pool, and the like.Clean only with a dry cloth.Do no block any type of ventilation openings. Install in accordance through the manufacture"s instructions.Do no install near any type of heat sources such together radiators, warm registers, stoves, or various other apparatus (including amplifiers) that produce heat.Do not defeat the safety objective of the polarized or grounding-type plug. A polarized plug has two blades with one broader than the other. A grounding kind piug has actually two blades and also a 3rd grounding prong. The broad blade or the 3rd prong are detailed for your safety. If the noted plug does no fit right into your outlet, top an electrician for replacement the the useless outlet.Protect the strength cord from being walked on or pinched particularly at the plugs, convenience receptacles, and also at the allude where they leave from the apparatus.Only use attachments/accessories stated by the manufacturer.Unplug the apparatus during lightning storms or when unused for long periods of time.Refer every servicing to qualified personnel. Servicing is compelled when the apparatus has been damaged in any type of way, together as strength supply cord or plug is damaged, liquid has been spilled or objects have fallen right into the apparatus has actually been exposed to rain or moisture, walk not run normally, or has been dropped.Please keep the unit in a great ventilation environment.CAUTION: this servicing instructions are for usage by qualified business personnel only. To alleviate the threat of electrical shock, perform not perform any kind of servicing other than that contained in the operating instructions unless you space qualified to do so.

WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.Ξ This equipment is a class II or twin insulated electrical appliance. It has actually been draft in together a method that that does not need a safety connection to electric earth.Do not install this tools in a confined or building-in room such together a publication case or comparable unit, and also remain a well ventilation conditions. The ventilation have to not it is in impeded by covering the ventilation openings through items such as newspaper, table-cloths, curtains etc.

WARNtNG: The apparatus shall not be exposed to dripping or splashing and that objects filled v liquids, such as vases, shall no be inserted on apparatus.

Caution: transforms or changes not specifically approved through the party responsible for compliance might void the user"s authority to operate the equipment.

WARNING: The battery shall no be exposed to excessive heat such as sunshine, fire or the like.

PG 3



*

This lightning flash and also arrowhead in ~ the triangle is a warning sign alerting yu of "dangerous voltage" within the product. CAUTION RISK OF electric SHOCKDO no OPEN CAUTION: TO alleviate THE risk OF electrical SHOCK, perform NOT remove COVER (ON BACK). NO USER SERVICEABLE components INSIDE. Express SERVICING come QUALIFIED company PERSONNEL.
*

The exclamation point within the triangle is a warning authorize alerting friend of crucial instructions accompanying the product.

WARNING: TO mitigate THE threat OF FIREOR electrical SHOCK, perform NOT EXPOSETHIS APPLIANCE come RAIN OR MOISTURE.

CAUTION: to PREVENT electrical SHOCK carry out NOT use THIS(POLARIZED) PLUG with AN extension CORD;:RECEPTACLE,:OROTHER OUTLE~MSS.::fHEBLADES"CAN be FUI LY INSERTEDTO avoid BLADE EXPOSURE.

Please review this prior to operating her unit.

This maker compiies with component 15 the the FCC Rules. Procedure is topic to the adhering to two conditions: (1) This machine may not cause harmful interference, and (2) this maker must accept any kind of interference received, consisting of interference that may cause undesired operation.

See more: How To Erase Animal Crossing New Leaf Data Animal Crossing New Leaf

NOTE: This tools has to be tested and also found come comply with the borders for course B digitaldevice, pursuant to component 15 the the FCC Rules. These borders are design to administer reasonableprotection against harmful interference in a residential instal!ation, Thia devices generates, uses.and deserve to radiate radio frequency energy and, if no installed and used in accordance with theinstructions, may reason harmful interference come radio communications. However, there is noguarantee that interference will not happen in a details installation. If this devices does causeharmful interference to radio or television reception, which have the right to be figured out by transforming theequipment off and on, the user is urged to shot to exactly the lntetference by one or an ext of thefollowing measures:

Reorient or relocate the receiving antenna.Increase the separation in between the equipment and also the receiver.Connect the tools into an outlet ~ above a circuit different from that to which the recipient isconnected.Consult the dealer or an knowledgeable radio/0/ technician because that help.

PG 4