An Over-The-Air (OTA) upgrade for the 2020 Corvette was sent out out freshly that adjusted the Body control Module (BCM) calibration for opened the hood, or prior trunk, (Fig. 2) utilizing the remote Keyless entry transmitter (key fob) as well as the hood access button ~ above the driver’s door. The software update changes the usability of the buttons.

You are watching: How to open a corvette hood

*
Fig. 2

Key Fob

To open the hood after the update using the crucial fob, the hood release switch (Fig. 3) have to be pressed and released once and then pressed and held a second time. If the button is not hosted down top top the 2nd button press, the hood will not open.

*
Fig. 3

Interior Hood release Button

To open the hood after the update using the hood release button on the driver’ door (Fig. 4), the switch must be pressed and also held till the hood unlatches. The transmission also must it is in in Park. One audible sound must be heard when the hood latch releases. Quickly pressing and releasing the switch will not actuate the hood release.

*
Fig. 4

Closing the Hood

The hood is not heavy enough to latch under its own weight. The hood will remain open up until the striker is pushed into the latch. When closing the hood, collection the hood striker into the latch and also then press on the front edge of the hood till the latch clicks twice.

Once the BCM has actually been updated, the driver will get the adhering to warnings and also alerts when the hood is not completely closed and latched:

The hood-ajar icon on the instrument cluster will illuminate and the Driver Information facility (DIC) screens a message that the hood is open. Automobile speed will certainly be minimal to 26 mph (42 km/h).An early stage audible chime will sound once.When the car is in Drive and moving over 3 mph (5 km/h), a persistent chime will play.

See more: Dickson City, Pa Bank Of America Near Scranton, Pa, Bank Of America

The OTA update have the right to be accepted and installed through the owner or the automobile may be booked for business at the dealership to receive the software program update.

– thanks to Jeff Strausser


GE-52250 PowerSmoke Diagnostic Leak Detector Shipping currently as important Tool
Duramax Diesel Exhaust Isolator No much longer in manufacturing