If your self-inking stamp impressions are obtaining light, you deserve to re-ink your stamps using our step-by-step images with indict below. Often, just re-inking your custom stamp can extend the life the the stamp, and enable it to do a great impression!

Re-Inking Trodat Stamps


*

Push the stamp down slightly and also pull out ink pad. Include 10-20 drops of Trodat / ideal Ink on the inked next of the pad, just enough to saturate the pad. When the octopus has absorbed into the pad, push the pad ago in.

You are watching: Can you refill a self inking stamp

Re-Inking Trodat day Stamps


*

Push stamp down slightly and push buttons on side to lock right into position.Pull out ink pad.Once the ink has absorbed into the pad, press the pad back in.

Re-Inking 2000 to add Stamps - new STYLE!


*

Push down slightly top top the rubber stamp – about 1/8” (Image 1).Lock the rubber stamp in place using the locks ~ above both sides of the rubber stamp (Image 2).Remove the octopus pad by pushing on the pad (Image 3).Allow the ink come absorb right into the rubber stamp pad.Replace the rubber stamp pad in the rubber stamp (Image 3).

Re-Inking 2000 Plus date Stamps


*

Push down slightly top top the stamp – about 1/8” (Image 1).Remove the octopus pad through pulling on the sheet on the pad (Image 1).Allow the ink to absorb into the stamp pad.Replace the rubber stamp pad in the stamp.

Re-Inking MaxLight Stamps


*
*
*

Remove the take care of and include the ink as follows. If there space 2 ports, divide the octopus evenly in between the 2 ports. Sizes 305, 325, PCM, PCL = 3-4 DropsSizes 115, 125, 145 = 4-6 DropsSizes 185, 265 = 6-8 DropsSize 165 = 8-10 DropsSize 245, 720 = 10-12 DropsSize 225 = 12-14 DropsSize 275 = 15-20 DropsSize 700, 750, 800 = 20-24 DropsReplace the manage and enable to sit for 5 minutes.Occasionally, you might see lint or record dust on her MaxLight surface. Simply location a piece of cellophane tape across the die of the stamp, rub your finger over the tape, then remove the tape. The tape will certainly lift turn off the residue.

Re-Inking MaxLight Slim rubber stamp 1854


Remove the clear plastic cover and the stamp index v your message on the (Image 1).Replace the index and clear plastic cover.

Re-Inking MaxLight Slim rubber stamp 2773


Remove the dust cover on the bottom the the rubber stamp (Image 1).Slid the stamp body sideways out of the manage of the stamp (Image 2).Slide the rubber stamp body sideways ago into the stamp take care of (Image 2).Occasionally, you may see lint or document dust on your MaxLight surface. Simply place a item of cellophane tape throughout the dice of the stamp, rub your finger over the tape, then remove the tape. The tape will lift off the residue.

Re-Inking XStampers


Most XStampers just require between 2 come 6 drops of ink.Re-inking need to be carry out at such time as soon as the rubber stamp impression has come to be consistently light. Many XStampers have the right to be refilled through the back by removed the handle. They were designed this way to save your hand clean and also ink free.Occasionally, you might see lint or paper dust on her XStamper surface. Simply location a item of cellophane tape throughout the die of the stamp, rub your finger over the tape, then remove the tape. The tape will certainly lift turn off the residue.

See more: Dog Eyes Rolling Back In Head And Shaking, My Dog'S Eye Rolls Back In Its Head

Re-Inking XStamper industrial Stamps


Re-inking need to be performed at together time when the rubber stamp impression has become consistently light. XStampers commercial stamps can be refilled with the back by removing the handle. They were designed this way to keep your hand clean and also ink free.Industrial XStampers call for the following quantities of ink:XStamper F06 and F11 - 5 drops of inkXStamper F10 - 10 fall of inkXStamper F30 - 25 autumn of inkOccasionally, you may see lint or file dust on her XStamper surface. Simply location a item of cellophane tape across the dice of the stamp, rub your finger over the tape, then remove the tape. The tape will certainly lift turn off the residue.
authorize Up because that Our email List

Get rubber stamp ideas and promotions, plus a line to the newest stamp and also embosser products to save you time, money, and also frustration.