l version="1.0" encoding="UTF-8" ?>Builder"s Calculator Tutorial

Here"s a straightforward one so friend can get used to exactly how this works. You go into a worth on the left and also click the "Convert To" button.

You are watching: 5 7/16 divided by 2

Inches: Feet: Inches:

If you gotten in 63, that should show 5 feet and 3 inches.

The calculators are specifically design for contractors using plain measuring tapes. All dimensions are based upon 1/16th of one inch.

Fraction: /24816 Decimal:

When you go into a fraction there is always a field to kind a number (filled in together "7" above, the numerator, or height number) and a popup with choices 2, 4, 8, and 16 (the denominator or bottom number). 16 is constantly selected together the default. If you go into 7/16, the shouldconvert come 0.4375.

You can go into fractions choose 1/2 by start 1 in the field and selecting 2 indigenous the popup, or youcan go into it together 8/16. Both means work fine.

It"s additionally okay to get in improper fractions into any portion box. You can enter 24/16 in the box aboveand it will transform to 1.5.

These calculators constantly approximate to beneficial measurements for a ice cream measure.

Decimal: Fraction: /

If you use the instance of .333 over it will transform to 5/16, which is the closest approximationon the 16ths scale (5/16 = 0.3125).

You will usage the foot/inch/fraction method of entering worths all the time. That looks prefer this:

" and /24816" Inches:

You go into feet right into the first box, inches right into the second, and also the the numerator and denominator, favor you walk before. In this example, it"s preset to 2 feet, 1 3/4", which should convert to 25.75.

You don"t actually have to enter feet and also inches. Girlfriend can get in 0" and any variety of inches into any type of of these boxes.

" and /24816" Inches:

In this instance 32 1/8" will convert to 32.125.

You don"t also need to usage the fraction. Friend can go into decimal numbers because that feet and inches.

" and /24816" Inches:

For this calculator this isn"t really useful yet in several of the more complicated calculators it have the right to come in handy. If you get in a non-integer into the inches ar the numerator and denominator fields will it is in ignored.Also this only works because that feet and inches. The numerator should be an integer.

And there"s the reverse version:

Inches: " /"

128.125" is 10"-8 1/8"

Here"s wherein we obtain to the fun stuff. This looks really complicated, yet it"s not that bad.

Add: " and /24816" + " and /24816" " /"

In this example, you"d adding 1"-3 1/2" and 7 9/16". Struggle the = button and also it should display 1"-11 1/16"!

And remember, you can skip the feet, enter decimals in the feet and inch fields, and also improper fractions space okay.

The multiplication and division calculators must be fairly obvious by now:

Divide: " and /24816" ÷ " /"

In this example separating 36 3/4" by 3 outcomes in 1"-0 1/4" (12 1/4"). The factor you multiply or division by can be a decimal number, too.

Angle calculator. This is the most complicated one, yet it"s an extremely powerful.

*

A: " and /24816" ("run")

B: " and /24816" ("rise")

C: " and /24816" ("hypotenuse")

Angle: °

The idea is the you go into two piece of info that you know and also it willfigure out the various other two.

Say you have a 4/12 key roof. Enter A=12" and also B=4" and also kit the calculate button. It should come back with C=1"-0 5/8" which is the distance throughout the surface ar of your roof. And the edge is 18.43°.

Make sure you struggle the clear button before reusing the calculator.

See more: Những Công Dụng Tuyệt Vời Của Vòng Tay Đá Mắt Mèo Đen Tự Nhiên 10Mm

If you go into A=3" and B=4" it must come back with C=5" and also Angle=53.13°.

Say I have a slope. I"ve measured that I have a 96" run and also a 78" rise. What"s the angle?

*

A: " and also /24816" ("run")

B: " and also /24816" ("rise")

C: " and /24816" ("hypotenuse")

Angle: °

39°

Furthermore, I have actually a item that I desire to crossing it. It"s a 2x6 (1 1/2" x 5 1/2").How far from the edge execute I need to measure back to do my cut?